- 85 -
Advanced (Recording pictures)
If you rotate the rear dial when [MF ASSIST] is set to [MF1] or [MF2], MF assistance is
activated and the screen is enlarged allowing you to focus on the subject more easily.
Select [MF ASSIST] on the [SETUP] menu. (P28)
Press 3/4 to select [MF1] or [MF2] and then press [MENU/SET].
Press [MENU/SET] to close the menu.
• You can also press the shutter button halfway to finish.
∫ Changing the zoom area
The magnified area can be changed while the screen is expanded using MF Assist. This is
convenient when you want to change the focus position to take pictures.
•
The following will return the MF assistance to the original position.
– Changing the picture size or aspect.
– Turning the camera off.
MF ASSIST
[MF1] The centre of the screen is enlarged. You can adjust the focus while
determining the composition of the whole of the screen.
[MF2] The centre of the screen is enlarged over the whole screen. This is
convenient for adjusting the focus in wide angle shots for which changes in
focus are difficult to grasp.
[OFF] The screen is not enlarged.
1 Rotate the rear dial to display MF
assistance on the screen.
2 Display MF area (enlarged area) by
pressing [MENU/SET].
3 Change the area to be expanded
with the cursor buttons 3/4/2/1.
4 Press [MENU/SET] to set.
()
To Next Page
Loading...
