12 VQT4J01 (ENG)
Names and Functions of Main Parts
■
[ND/FOCUS] lever
To operate this lever, move it left or right, or push it in.
Manual Focus
adjustment, etc.
Turning the built-in
ND filter on/off, etc.
When the built-in
ND filter is turned
on, you can use
even slower shutter
speeds or a wider
aperture.
Press
■
Rear dial
To operate the dial, rotate it left or right, or push it in.
Shutter speed
adjustment, etc.
Selecting and
setting operation
items, etc.
Press
■
Aperture ring
Rotate the ring to adjust the aperture value.
Align with the indicator.
■
Built-in flash
The flash opens.
After use, press down the flash until it clicks into place.
To Next Page
Need help?
General
