112
SQW0740
4K Photo and Drive Settings
Recording 4K Photos
[4K Burst(S/S)]
“S/S” is an
abbreviation of
“Start/Stop”.
Press the shutter button fully
• Recording will start.
• If you are using Auto Focus, continuous AF will work while recording.
Focus will be adjusted continuously.
Press the shutter button fully again
• Recording will stop.
Start (First)
Stop (Second)
Recording is performed
When you press the [Fn1] button while recording, you can add a
marker. (Up to 40 markers for each recording.) When selecting and
saving pictures from a 4K burst file, you can skip to the positions
where you added markers.
[4K Pre-Burst]
• When you press the shutter button halfway, the aperture value and
shutter speed are displayed.
Press the shutter button fully
• Auto Focus adjusts focus continuously, and except in Manual
Exposure Mode, it also adjusts exposure continuously.
• When recording with [
] ([4K Pre-Burst]), images may not be
displayed as smoothly as when recording with the normal recording
screen.
Approximately 1 second
Recording is performed
In situations where you want to lock focus and exposure, such as
when the subject is not at the centre, use [AF/AE LOCK]. (→102)
To Next Page
Loading...
Need help?
General
