280
SQW0740
Connecting with other devices
Printing
Printing multiple pictures
Multiple pictures are printed at one time.
1
Press to select [Multi Print] in step
3
of “Printing” (→279)
2
Use to select the item and press [MENU/SET]
[Multi Select]
Scroll between pictures with , select pictures to print with
[MENU/SET] (Press [MENU/SET] again to release selection.)
Use to select [OK], and press [MENU/SET]
[Select All] Print all pictures.
[Print Set (DPOF)] Print pictures selected in [Print Set]. (→224)
[Favorite] Print pictures selected as [Favorite]. (→223)
3
Use to select [Print start] and press [MENU/SET]
(Print settings (→281))
●
The group pictures are displayed one by one instead of all pictures at the same time.
●
Use a battery with sufficient battery power or the AC adaptor (optional) and DC coupler (optional).
When the battery begins to run out during communication, a warning beep sounds. Cancel printing
and disconnect USB connection cable (supplied).
●
Before inserting or removing a card, turn the camera off and disconnect the USB connection
cable.
●
Some printers can print directly from the camera’s memory card. For details, see the manual for
your printer.
●
An orange “●” displayed during printing indicates an error message.
●
Print may be divided into several pictures if printing a large amount of pictures. (Remaining sheets
display may differ from the number of pictures set for printing.)
●
Motion pictures, 4K burst files, and pictures recorded with [Post Focus] cannot be printed.
●
Still pictures recorded in a RAW file cannot be printed. (The still pictures recorded in JPEG file
format at the same time as the RAW file can be printed.)
To Next Page
Loading...
Need help?
General
