51
SQW0740
Recording mode
Taking pictures with automatic settings (Intelligent Auto Mode)
Auto Focus, Face/Eye Detection, and Face Recognition
[AF Mode] is automatically set to [ ]. If you touch the subject, the camera switches to
[ ] and the AF tracking function starts operating.
You can also switch to [ ] by pressing [MENU/SET], going to the [Rec] menu, then
going to the [AF Mode] menu and selecting [ ] (tracking). Align the AF tracking area with
the subject and press the shutter button halfway to operate the AF tracking function.
For details about AF tracking, refer to (→91).
• When [Face Recog.] (→183) is set to [ON] and if the camera recognises a face similar
to a registered face, [R] is displayed on the upper right corner of the [ ], [ ], and
[ ] icons.
Flash
When the flash is open, the camera automatically sets [ ], [ ] (Auto/Red-Eye
Reduction), [ ], or [ ] based on the type of subject and brightness.
●
When [ ] or [ ] is displayed, the [Red-Eye Removal] function is activated to automatically
detect red-eye and correct the picture data.
●
When [ ] or [ ] is selected, the shutter speed is reduced.
To Next Page
Loading...
Need help?
General
