EasyManuals Logo

Panasonic Lumix DMC-TZ2 User Manual

Panasonic Lumix DMC-TZ2
55 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background imageLoading...
Page #2 background image
2 VQT1B61 VQT1B61 3
A lithium ion/polymer battery that is recyclable powers the product you
have purchased. Please call 1-800-8-BATTERY for information on how
to recycle this battery.
Dear Customer,
Thank you for choosing Panasonic!
You have purchased one of the most
sophisticated and reliable products on the
market today. Used properly, we’re sure
it will bring you and your family years of
enjoyment. Please take time to fill in the
information below.
The serial number is on the tag located
on the underside of your Camera. Be sure
to retain this manual as your convenient
Camera information source.
Model No.
Serial No.
Information for Your Safety
WARNING:
TO REDUCE THE RISK OF FIRE,
ELECTRIC SHOCK OR PRODUCT
DAMAGE,
DO NOT EXPOSE THIS APPARATUS
TO RAIN, MOISTURE, DRIPPING
OR SPLASHING AND THAT NO
OBJECTS FILLED WITH LIQUIDS,
SUCH AS VASES, SHALL BE
PLACED ON THE APPARATUS.
USE ONLY THE RECOMMENDED
ACCESSORIES.
DO NOT REMOVE THE COVER
(OR BACK); THERE ARE NO USER
SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
Carefully observe copyright laws.
Recording of pre-recorded tapes or
discs or other published or broadcast
material for purposes other than your
own private use may infringe copyright
laws. Even for the purpose of private
use, recording of certain material may
be restricted.
THE SOCKET OUTLET SHALL BE
INSTALLED NEAR THE EQUIPMENT
AND SHALL BE EASILY ACCESSIBLE.
CAUTION
Danger of explosion if battery is
incorrectly replaced. Replace only
with the same or equivalent type
recommended by the manufacturer.
Dispose of used batteries according to
the manufacturer’s instructions.
Warning
Risk of fire, explosion and burns. Do not
disassemble, heat above 60 °C (140 °F)
or incinerate.
Marking sign is located on bottom of the
unit.
THE FOLLOWING APPLIES ONLY IN
THE U.S.A.
FCC Note: (U.S. only)
This equipment has been tested and
found to comply with the limits for a
Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits
are designed to provide reasonable
protection against harmful interference
in a residential installation. This
equipment generates, uses, and can
radiate radio frequency energy and, if
not installed and used in accordance
with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that
interference will not occur in a particular
installation. If this equipment does
cause harmful interference to radio
or television reception, which can be
determined by turning the equipment off
and on, the user is encouraged to try to
correct the interference by one or more
of the following measures:
Reorient or relocate the receiving
antenna.
Increase the separation between the
equipment and receiver.
Connect the equipment into an outlet
on a circuit different from that to which
the receiver is connected.
Consult the dealer or an experienced
radio/TV technician for help.
FCC Caution: To assure continued
compliance, follow the
attached installation
instructions and use only
shielded interface cables
with ferrite core when
connecting to computer or
peripheral devices.
Any changes or modifications not
expressly approved by the party
responsible for compliance could void
the user’s authority to operate this
equipment.
Declaration of Conformity
Trade Name: Panasonic
Model No.: DMC-TZ2
DMC-TZ3
Responsible party: Panasonic
Corporation of
North America One
Panasonic Way,
Secaucus, NJ 07094
Support Contact: Panasonic Consumer
Electronics Company
1-800-272-7033
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) This device
may not cause harmful interference,
and (2) this device must accept any
interference received, including
interference that may cause undesired
operation.
DMC-TZ2
DMC-TZ3
THE FOLLOWING APPLIES ONLY IN
CANADA
This Class B digital apparatus complies
with Canadian ICES-003.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Panasonic Lumix DMC-TZ2 and is the answer not in the manual?

Panasonic Lumix DMC-TZ2 Specifications

General IconGeneral
Megapixel6 MP
Camera typeCompact camera
Sensor typeCCD
Image stabilizerYes
Supported aspect ratios3:2, 4:3, 16:9
Digital zoom4 x
Optical zoom10 x
Focal length range4.6 - 46 mm
InterfaceUSB
Digital SLRNo
Camera shutter speed8 - 1/2000 s
Focal length (35mm film equivalent)28 - 280 mm
Focus adjustmentAuto
Normal focusing range0.5- ∞ m
Auto focusing (AF) modescontinuous auto focus, single auto focus
Macro focusing range (tele)1- ∞ m
Macro focusing range (wide)0.05- ∞ m
Normal focusing range (tele)2 - ∞ m
Normal focusing range (wide)0.5 - ∞ m
Flash modesRed-eye reduction
Flash range (wide)0.6 - 4.2 m
Motion JPEG frame rate30 fps
Maximum video resolution848 x 480 pixels
Display diagonal2.5 \
Display resolution (numeric)207000 pixels
USB version2.0
Product colorBlack
Scene modesbeach, Candlelight, Children, Close-up (macro), Fireworks, Night, Night landscape, Night portrait, party (indoor), Portrait, self-portrait, Sports, Landscape (scenery)
Image editingresizing, rotating, trimming
Photo effectsblack&white, Sepia
White balanceauto, Cloudy, daylight, Fluorescent, Shade
Camera playbackmovie, slide show
Battery capacity1000 mAh
Power requirements110-240V AC
Battery life (CIPA standard)300 shots
Number of batteries supported1
Compatible memory cardsmmc, sd, sdhc
Weight and Dimensions IconWeight and Dimensions
Depth59 mm
Width105 mm
Height37 mm
Weight222 g

Related product manuals