EasyManuals Logo

Panasonic Lumix DMC-TZ2 User Manual

Panasonic Lumix DMC-TZ2
55 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
3
1ST DAY
10:00 MAR.15.2007
4 VQT1B61 VQT1B61 5
The battery is not charged
when the camera is
shipped. Charge the
battery and set the clock
before use.
When you do not use the
card (sold separately), you
can record or play back
pictures on the built-in
memory (P.26).
Camera
ON/OFF Switch
Previous Next
Quick start guide
Charge the battery
Insert the battery
and the card
Set the mode dial
to
Press the shutter button and
take pictures
To play back the pictures
1. Set the mode dial to .
2. Select the picture
you want to view.
-If you see this symbol-
Information on Disposal in other
Countries outside the European
Union
This symbol is only valid in the
European Union. If you wish to discard
this product, please contact your local
authorities or dealer and ask for the
correct method of disposal.
About the battery pack
Battery pack (Lithium ion battery pack)
Use the specified unit to recharge the
battery pack.
Do not use the battery pack with
equipment other than the specified
unit.
Do not get dirt, sand, liquids, or other
foreign matter on the terminals.
Do not touch the plug terminals (+ and
) with metal objects.
Do not disassemble, remodel, heat or
throw into fire.
If any electrolyte should come into
contact with your hands or clothes, wash
it off thoroughly with water.
If any electrolyte should come into
contact with your eyes, never rub the
eyes. Rinse eyes thoroughly with water,
and then consult a doctor.
About the battery charger
CAUTION!
DO NOT INSTALL OR PLACE THIS
UNIT IN A BOOKCASE, BUILT-
IN CABINET OR IN ANOTHER
CONFINED SPACE. ENSURE THE
UNIT IS WELL VENTILATED. TO
PREVENT RISK OF ELECTRIC
SHOCK OR FIRE HAZARD DUE
TO OVERHEATING, ENSURE
THAT CURTAINS AND ANY OTHER
MATERIALS DO NOT OBSTRUCT THE
VENTILATION VENTS.
Battery charger
This battery charger operates on AC
between 110V and 240 V.
But
In the U.S.A. and Canada, the battery
charger must be connected to a 120V
AC power supply only.
When connecting to an AC supply
outside of the U.S.A. or Canada, use
a plug adaptor to suit the AC outlet
configuration.
Note
Example screens displayed in this manual are for DMC-TZ3 model.
DMC-TZ2:

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Panasonic Lumix DMC-TZ2 and is the answer not in the manual?

Panasonic Lumix DMC-TZ2 Specifications

General IconGeneral
Megapixel6 MP
Camera typeCompact camera
Sensor typeCCD
Image stabilizerYes
Supported aspect ratios3:2, 4:3, 16:9
Digital zoom4 x
Optical zoom10 x
Focal length range4.6 - 46 mm
InterfaceUSB
Digital SLRNo
Camera shutter speed8 - 1/2000 s
Focal length (35mm film equivalent)28 - 280 mm
Focus adjustmentAuto
Normal focusing range0.5- ∞ m
Auto focusing (AF) modescontinuous auto focus, single auto focus
Macro focusing range (tele)1- ∞ m
Macro focusing range (wide)0.05- ∞ m
Normal focusing range (tele)2 - ∞ m
Normal focusing range (wide)0.5 - ∞ m
Flash modesRed-eye reduction
Flash range (wide)0.6 - 4.2 m
Motion JPEG frame rate30 fps
Maximum video resolution848 x 480 pixels
Display diagonal2.5 \
Display resolution (numeric)207000 pixels
USB version2.0
Product colorBlack
Scene modesbeach, Candlelight, Children, Close-up (macro), Fireworks, Night, Night landscape, Night portrait, party (indoor), Portrait, self-portrait, Sports, Landscape (scenery)
Image editingresizing, rotating, trimming
Photo effectsblack&white, Sepia
White balanceauto, Cloudy, daylight, Fluorescent, Shade
Camera playbackmovie, slide show
Battery capacity1000 mAh
Power requirements110-240V AC
Battery life (CIPA standard)300 shots
Number of batteries supported1
Compatible memory cardsmmc, sd, sdhc
Weight and Dimensions IconWeight and Dimensions
Depth59 mm
Width105 mm
Height37 mm
Weight222 g

Related product manuals