- 21 -
Picture save destination (cards and built-in memory)
Displaying the picture recording capacity
Estimated remaining pictures or recording time capacity
(press [DISP.] button to switch display)
Displayed when no card is inserted
(pictures will be saved to built-in memory)
While the camera is accessing the card or built-in memory (for an operation such as
picture writing, reading, deletion, or formatting), do not turn off the camera or remove the
battery, card, or AC adaptor (supplied). Do not subject the camera to vibrations, impact,
or static electricity.
The card or the data on the card may be damaged, and this unit may no longer operate
normally.
If operation fails due to vibration, impact or static electricity, perform the operation again.
To Next Page
Loading...
