VQT4P25
Basics
Taking pictures with your own settings
[Program AE] Mode
- 23 -
The aperture value and shutter speed are automatically set for recording.
Using the [Rec] menu to change settings and set up your own recording environment.
Set to ([Program AE] Mode)
Take a picture
Press halfway
(press lightly to focus)
Press fully
(press the button all the way to
record)
●
If a warning is displayed about jitter, use [Stabilizer],
a tripod, or [Self Timer].
●
If aperture and shutter speed are shown in red, you
do not have appropriate exposure. You should either
use the flash, change [Sensitivity] settings or set
[Min. Shtr Speed] to a slower speed.
Jitter alert
display
Aperture value Shutter speed
To Next Page
Loading...
