VQT4P25
Basics
Using the [Setup] menu
- 51 -
• For the setting procedures of the menu. (→42)
[Output]
Change the settings to be used when the camera is connected to a TV or other device.
■
Settings
[Video Out]
[NTSC] / [PAL]
[TV Aspect] (This setting performs when an AV cable (optional) is connected.)
/
[VIERA Link]
Enable automatic linking with other VIERA Link-compatible devices, and operability with a
VIERA remote control when connecting via an HDMI mini cable (optional) (→132).
■
Settings
[ON]: Operations may be performed via the remote control of the VIERA Link-
compatible device.
(Not all operations will be available.)
Operability of the camera’s own buttons will be limited.
[OFF]: Operations must be performed via the camera’s own buttons.
[3D Playback]
Set how 3D still picture is output.
■
Settings: [3D] / [2D]
●
If you want to play back a picture in 2D (conventional picture) on a 3D television, set
to [2D].
●
This item of the menu functions when an HDMI mini cable (optional) is connected.
●
For the procedure for playing back a 3D still picture (→134).
To Next Page
Loading...
