VQT4P25
Application (Record)
Determining aperture and shutter speed and recording
- 68 -
[Manual Exposure] Mode
This mode of recording lets you set any aperture value and shutter speed
when exposure adjustment prevents you from recording at the desired
exposure (brightness/darkness).
Set mode dial to ([Manual Exposure] Mode)
• Manual exposure assist is displayed.
Press [EXPOSURE] button and use cursor button to determine
aperture value and shutter speed
Aperture value/shutter speed
Press [EXPOSURE] button
■
Recording motion pictures in
• Aperture and shutter speed are automatically set.
■
Manual exposure assist (estimate)
If the shutter button is pressed halfway, manual exposure assist is displayed.
Shows pictures with standard brightness.
Shows brighter pictures. For standard brightness, either use a faster
shutter speed or increase aperture value.
Shows darker pictures. For standard brightness, either use a slower
shutter speed or reduce aperture value.
●
When the picture is too bright or too dark or there is incorrect exposure, the numbers
for the aperture value and shutter speed are shown in red.
●
LCD monitor brightness may vary from the actual still picture recorded.
●
The lower limit of shutter speed differs depending on ISO Sensitivity.
To Next Page
Loading...
