Panasonic Lumix DMC-TZ5P - 8.3. Disassembly Procedure

23
8.3. Disassembly Procedure
8.3.1. Removal of the Rear Case Unit
Fig. D1
No. Item Fig. Removal
1 Rear Case Unit Fig.D1 Card
Battery
2 Screws (A)
1 Screw (B)
2 Screws (C)
FP9004 (Flex)
FP9007 (Flex)
Rear Case Unit
2 LCD Unit Fig.D2 5 Locking tabs
LCD Unit
3 Main P.C.B. Unit, Fig.D3 1 Locking tab
Slide Guide
Slide Knob
FP9001 (Flex)
FP9002 (Flex)
PP9001 (Connector)
Main P.C.B.
PCB Spacer
4 Top Operation Unit Fig.D4 Top Operation Unit
5 Top Operation P.C.B. Fig.D5 2 Locking tabs
AF Panel Light
FP9902 (Flex)
2 Screws (D)
3 Locking tabs
Top Operation P.C.B.
Fig.D6 NOTE: (When Installing)
6 Sub P.C.B. Fig.D7 1 Screw (E)
PCB Plate
FP9801 (Flex)
FP9802 (Flex)
2 Locking tabs
Sub P.C.B.
7 Lens Unit Fig.D8 2 Screws (F)
1 Screw (G)
Lens Unit
8 Flash Unit, Battery Case
Unit, Battery Frame Unit,
Front Grip, Front Case
Fig.D9 1 Screw (H)
2 Screws (I)
1 Screw (J)
2 Screws (K)
Fig.D10 2 Locking tabs
Flash Unit
Battery Case Unit
Battery Frame Unit
2 Locking tabs
Front Grip
Front Case
9 Battery Case Unit Fig.D11 3 Locking tabs
Battery Case Unit