Others
Q&A Troubleshooting
- 219 - VQT4J15
TV, computer, printer
No image appears on TV. Image blurred or not coloured.
●
Not connected correctly (→183).
●
The television has not been switched to auxiliary input.
●
Check the [Video Out] setting (NTSC/PAL) on the camera. (→39)
TV screen display different to LCD monitor.
●
Aspect ratio may be incorrect or edges may be cut off with certain televisions.
Cannot play motion pictures on TV.
●
Card is inserted into TV.
→ Connect with AV cable (optional) or HDMI mini cable (optional) and play on camera (→183).
Picture is not displayed on full TV screen.
●
Check [TV Aspect] settings (→39).
No sound is output from the camera speaker.
●
When the AV cable (optional) or HDMI mini cable (optional) is connected to the camera, no sound is
output from the camera.
VIERA Link (HDMI) is not working.
●
Is the HDMI mini cable (optional) connected correctly? (→183)
→ Check that the HDMI mini cable (optional) is fully inserted.
●
Is the camera’s [VIERA Link] setting set to [ON]? (→40)
→ The input setting may not be able to be changed automatically with certain television HDMI
sockets. In this case, please change the input setting with your television’s remote control
(consult your television’s operating instructions for details).
→ Check the VIERA Link (HDMI) settings on the device you are connecting to.
→ Turn the camera’s power off and on again.
→ Turn the “VIERA Link control (HDMI device control)” setting on your television (VIERA) to off and
then to on again. (Consult your VIERA’s operating instructions for details.)
To Next Page
Loading...
Need help?
General
