1. Remove the three A packings at the section where the
ON/OFF switch is fitted.
2. Find the three switch pedal tabs hooked to the section
where the three A packings were removed.
Unhook the tabs using a flat-blade screwdriver.
* If any of the tabs cannot be unhooked, then break
them to remove them.
3. Remove the screw fixing the switch cover to remove the
switch cover and the switch.
4. In order to fit a new switch, assemble the unit by carrying
out the disassembly procedure in reverse.
Assemble the switch, switch cover, and the switch spring
into a switch pedal. Then, push the switch pedal into the
upper body.
5.7. ON/OFF switch removal
11
MC-E7111-AE79 / MC-E7111-AE7A / MC-E7111-RE79 / MC-E7111-RW79 / MC-E7111-AW79 / MC-E7113-RE79 / MC-E7113-RW79
To Next Page
Loading...
