Panasonic MC-SBV01 - Exhaust Vent and Filter Cleaning; Agitator Attachment

Exhaust vent
Pre-filter
Wash
in water
Wash
in water
15
ENGLISH
Main unit/Extension wand
Wash
in water
Wipe with a soft damp cloth.
●
Wring dry
●When washing with water ...
◦
Be sure to drain and dry well.
(Failure to do so may lead to smell and clogging)
◦
Do not expose to hot airflow from a hairdryer and the like.
(Agitator (brush)):
May lead to deformation and failure
）
(
Pre-filter: May lead to rubbish penetration and failure due
to filter shrinkage
)
●
Do not use detergent, benzine, thinner, alcohol, etc. (May
lead to cracks and discolouration)
● When using a wipe, follow its instructions.
Request
Remove rubbish from the
area.
Dust box (P.12)
●The dust cup’s transparency decreases with the
number of times it is cleaned, but that does not
affect its performance.
Pat the dust off or rinse.
●B
e sure to put it back after
maintenance.
Attaching method
①
②
2
Set the brush
cover in
1
Set the agitator
(brush) in
① Fit the brush
cover into the tab
②Push it in until it
clicks
①
②
Tab
Click
Brush cover