14
Maintenance (Continued)
Be sure to press “OFF” and unplug the charging adapter before performing maintenance.
When suction power weakens (about once a month)/When maintenance is required
Wash
in water
Except for the
agitator (brush)
■
Detach and attach the agitator (brush)
Wash the agitator (brush) with water
Remove rubbish from the area.
Detaching method
Wash
in water
●Remove entangled hair, etc.
with tweezers, etc.
Cut away entangled
debris, etc. with scissors
along the groove.
①
②
Detach the agitator (brush)...
1
Remove the brush cover
2
Remove the
agitator (brush)
①
While pulling the tab in the
direction of the arrow
②Pull it up
①
②
Tab
Remove rubbish from the
area.
To Next Page