1
CONTENTS
INTRODUCTION P. 2
PRECAUTIONS FOR SAFE OPERATION P. 3
LABELS ON THE UNIT P. 7
SYMBOLS ON THE UNIT P. 7
ENVIRONMENTAL CONDITIONS P. 8
INTENDED USE AND PRECAUTIONS P. 8
FREEZER COMPONENTS P. 9
Control panel P.11
INSTALLATION SITE P.12
INSTALLATION P.13
START-UP OF UNIT P.14
CHAMBER TEMPERATURE SETTING P.15
KEY LOCK FUNCTION P.15
ALARM TEMPERATURE SETTING P.16
SETTING OF ALARM RESUME TIME P.17
REMOTE ALARM TERMINAL P.18
MONITOR OF FREEZER STATUS P.19
CHANGE OF COMPRESSOR DELAY TIME P.20
CHANGE OF DOOR ALARM DELAY TIME P.21
ALARMS & SAFETY FUNCTIONS P.22
ROUTINE MAINTENANCE P.23
Cleaning of cabinet P.23
Cleaning of condenser filter P.23
Defrosting of inside wall P.24
CALIBRATION P.24
TROUBLESHOOTING P.25
DISPOSAL OF UNIT P.26
Recycle of battery P.26
Decontamination of unit P.26
DISPOSAL OF BATTERY P.31
TEMPERATURE RECORDER (OPTION) P.32
Setting of MTR-85H P.32
Setting of MTR-G85C P.34
Installation of MTR-G85C and MTR-85H P.36
BACKUP COOLING KIT (OPTION) P.36
SMALL INNER DOOR (OPTION) P.38
DRAWER RACK (OPTION) P.38
INTERFACE BOARD (OPTION) P.38
Installation of MTR-480 P.38
INVENTORY RACK (OPTION) P.39
SPECIFICATIONS P.40
PERFORMANCE P.42
SAFETY CHECK SHEET P.43
To Next Page
Loading...
