Panasonic MX-V310

EN4
Parts Identifi cation
■Note:
• Do not push the Safety Lock Pin and any Safety Levers with any instrument such as stick.
• Do not pour liquids or ingredients at the Safety Lock Pin and Control Panel area.
• Keep the Safety Lock Pin and Safety Lever area clean to avoid foreign particles accumulating in the area.
ڦ The illustrations inside mainly shows MX-V310 model.
The Safety Lock mechanism has been designed to prevent the appliance from switching ON when the appliance is
not properly in place.
1500
1000
500
1500
1000
500
MX-V310 MX-V300
One scale
approx. 0.25 L
Blender
Wet & Dry Mill
Blender
Lid
Scraper
Inner
Lid
Blender
Gasket
Blender
Cutting Blade
Blender
Jug Base
Blender
Jug (Glass)
Working
Capacity:
1.5 L
Mill Container
Mill Gasket
Mill Cutting Blade
Mill Container Base
Blender
Jug (Plastic)
Safety Lever
Safety Lock Pin
Motor
Housing
Cord Plug*Control
Panel
* The shape of the Plug may vary according to regions or countries.
Operation Label (included)
Stick on the Motor Housing to refer to
the translation of the Control Panel.
The correct position to stick on the
Motor Housing is written on the label.
(Illustration shown below is for MX-V310)
Blender_MX-V310_300 (EVT).indb 4Blender_MX-V310_300 (EVT).indb 4 11/28/2017 6:30:58 PM11/28/2017 6:30:58 PM