To Next PageTo Next PageWhat to do if the door won't open on my Panasonic NA-140VS4 Washer?
If the door of your Panasonic Washer won't open, it could be due to a few reasons. The door lock or the child safety lock might be activated; try deactivating them. Also, the water temperature or level may be too high; wait for it to decrease.
Why is no water going into my Panasonic NA-140VS4 Washer?
Several reasons could explain why water isn't entering your Panasonic Washer. The water tap might be off, so ensure it is turned on. The water-supply hose could be frozen, in which case you should thaw it. There might be a disruption in the water supply, so check that. Lastly, the water-supply filter might be clogged, and you should clean it.
Why does the spin cycle repeatedly start and stop on my Panasonic Washer?
The spin cycle on your Panasonic Washer might repeatedly start and stop because intermittent spinning of the tub helps the spin process to operate quietly. This is normal. Alternatively, the laundry may be too light, try adding one or two bath towels.
Why do the buttons on my Panasonic Washer not work?
The buttons on your Panasonic Washer may not be working because the programme, temperature, and process settings cannot be changed while washing is in progress (the rinse and spin settings can be changed). The child safety lock may also be activated.
How to fix buttons that don't work on my Panasonic NA-140VS4 Washer?
If the buttons on your Panasonic Washer aren't working, the child safety lock may be activated. Deactivate the child safety lock to restore button functionality.
Why does the displayed remaining time change on my Panasonic Washer?
The displayed remaining time on your Panasonic Washer changes because the remaining time is estimated and corrected continually, which is normal. The remaining time increases if an extra rinsing and spinning are required, which is normal for unbalanced loads.
How to get rid of the unusual odor coming from my Panasonic NA-140VS4?
If your Panasonic Washer has an unusual odor, it might be because rubber parts give off a smell when you first start using the appliance. Try running the drum by running the 90 °C program.
Why does rinsing begin before the spin process finishes in my Panasonic Washer?
Rinsing might begin before the spin process finishes in your Panasonic Washer because the appliance may have detected an unbalanced load. Allow the appliance to correct the imbalance. Also, after washing, excess foam may remain, which is normal; allow the appliance to manage foam detection.
Why do foam and water remain in the door or door seal of my Panasonic NA-140VS4?
Some foam and water might remain in the door or door seal of your Panasonic Washer depending upon the state of the laundry and the amount of detergent used. This is normal.
Why during spin-dry does the drum stop and rotate several times in my Panasonic NA-140VS4?
During spin-dry, the drum of your Panasonic Washer might stop and rotate several times, which is normal. Allow the appliance to correct the load.
General| Water consumption per cycle | - L |
|---|---|
| Energy consumption washing per cycle | 0.85 kWh |
| Annual water consumption washing | 12400 L |
| Annual energy consumption washing | 167 kWh |
| Door color | Black |
| Door hinge | Left |
| Drum volume | 70 L |
| Control type | Buttons, Rotary |
| Display type | LED |
| Loading type | Front-load |
| Product color | White |
| Built-in display | Yes |
| Door opening angle | 150 ° |
| Appliance placement | Freestanding |
| Drum capacity | 10 kg |
| AquaStop function | No |
| Delay start (max) | 24 h |
| Residual moisture | 53 % |
| Spin-drying class | B |
| Maximum spin speed | 1400 RPM |
| Noise level (spin) | 71 dB |
| Noise level (wash) | 53 dB |
| Number of washing programs | 8 |
Weight and Dimensions| Depth | 625 mm |
|---|---|
| Width | 596 mm |
| Height | 845 mm |
| Door diameter | 340 mm |
