Panasonic NA-140XS1

24
Optional Functions
Changing Programme Settings
You can change the washing
temperature according to the type of
laundry or the degree of soiling.
After selecting a programme, you can
reset the temperature and the
programme end time.
■Preparing
● Sort the laundry and put it into the
drum. (P.9)
● Add the detergent. (P.12)
1
Turn on the power.
2
Select a programme.
(P.18, 19)
3
Change settings of the
programme.
● The setting range depends
on the programme.
(P.20, 21)
4
Start operation.
Changing the temperature
r °C
3
Press.
The temperature indication
displayed changes with each
press.
■Setting range
C (Cold) - 90 °C (9 levels)
■Setting guide
● Higher temperature:
Whites, cottons, heavily soiled
items
● Lower temperature:
Colours, items that shrink
easily, lightly soiled items
25
Optional Functions
Change the spin speed to dry laundry
more thoroughly or reduce wrinkles in
laundry.
NOTE
● You can change the spin speed
after the programme starts and until
the wash process ends. Pause the
programme and do the steps 3 and
4.
You can set the time the programme
will end.
■To check a preset time
■To cancel settings
NOTE
● Do not use a detergent that is
difficult to dissolve because it may
cake up before the wash starts and
not flow into the drum.
● You cannot set the end time for the
“Wool” programme.
Changing the spin speed
M r/min
3
Press.
The spin speed indication
displayed changes with each
press.
■Setting range
500 - 1400 r/min (5 levels)
■Setting guide
● Higher speed:
To dry more thoroughly
● Lower speed:
To reduce wrinkling
Setting the programme end time
I Time
3
Press.
The time indication displayed
changes with each press.
Holding down “I Time” changes
the time continuously.
■Setting range
Up to 24 hours (in increments of 1
hour)
Press.
Turn off the power.
(All settings are cancelled)