Installing the anchor bolts
Remove each cover cap.1.
Insert each anchor bolt.2.
Tighten each bolt with a spanner.3.
Levelling the appliance
Loosen the plastic nut on each foot 1.
by turning it clockwise.
Adjust each foot by turning it 2.
clockwise or anticlockwise.
Use a spirit level to make sure that 3.
the appliance is properly levelled.
Tighten each plastic nut by turning it 4.
anticlockwise.
Caution
Make sure that all plastic nuts are -
tightened securely and the feet
are still securely bolted to the
appliance.
If they are unbolted, the appliance
will move around.
Do NOT put cardboard, wood -
or similar materials under the
appliance to compensate for
unevenness.
Be careful not to destabilize the -
appliance when cleaning the floor.
Plastic nut
Foot
To Next Page
Loading...
