8
Operation Panel
Change process settings
Change the combination of wash,
rinse and spin processes, and the
time length or number of times for
individual processes. (P. 18)
Flashing (in progress)
Lighting
After starting operation, you can
change settings only during wash
process by pressing “Start/Pause”.
(The wash process setting of the
“Soak” and “Stain Master” program
cannot be changed.)
Preset
Set the time to finish washing
(in hours). ( lights.)
e.g.) 8 hours later
Setting range:
2 - 24 hours later, in one-hour
increments.
(3 - 24 hours later for the
“Soak” program)
Not available for the
following programs:
“Delicate”, “Comforter”,
“Tub Hygiene”, “Super Dry 90”
For “Stain Master”
program (P. 17)
Change water amount
During the wash process, press
“Water Level” to check and
change the water amount.
Some water amounts cannot
be selected depending on the
program.
When the remaining time is
displayed, press “Water Level”
to check the water level.
Water amount/remaining time
After starting
operation, indicates
the water amount
according to the
amount of laundry.
After approx.
5 seconds, indicates
the approximate
remaining time (min).
Super Dry 90 (P. 18)Child Lock lamp (P. 20)
Operation panel of the NA-F135V5
Start/Pause
AWW9901D3003_EN.indd 8AWW9901D3003_EN.indd 8 7/2/2563 BE 13:307/2/2563 BE 13:30
To Next Page
Loading...
