26
Installation (continued)
Installation (continued)
4. Connect the water supply hose.
.
Water faucet
Water supply hose
1
Connect the water supply hose to
the water supply valve screw.
1 Hold the elbow and tighten the nut.
2 Check that the elbow is not loose.
● The procedure for cold water
and hot water is the same.
2
Connect the water supply hose to
the water faucet, and tighten the nut
clockwise with your hand.
3
Turn on the water faucets slowly and
make sure there are no leaks.
CAUTION
Do not make wrong connection for
the HOT and COLD water supply
faucets.
Tighten the nut firmly
.
Do not twist, squash, modify or cut
the hose.
HOTCOLD
Water supply
valve screw
Nut
Elbow
Water supply
hose
AWW9901D2X03_EN.indd 26AWW9901D2X03_EN.indd 26 7/2/20 2:18 PM7/2/20 2:18 PM
To Next Page
Loading...
