Convenient Functions Maintenance
11
Water supply lter
If water does not ow smoothly
NOTE
● Do not throw away or puncture the
lter to avoid damaging feeding
valve.
● Please clean the feeding valve
frequently if there is impurities in
water supply such as mold, iron,
etc.
● Follow the procedure below to prevent
splashing of water.
1
After turning off the water faucet
Turn the power on.
2
Start.
3
After approx. 40 seconds
Turn the power off.
4
Loosen the
nut and
remove the
hose.
Tub
Once a week <SẤY BẰNG GIÓ 90' (Air Dry)>
1
After operation ends
Run the
8
SẤY BẰNG GIÓ 90'
(Air Dry) program without
loading laundry. (P. 9)
Once a month <VỆ SINH LỒNG GIẶT (Tub Hygiene)>
Preparation: Turn on the water faucet.
1
Without loading laundry
Turn the power on.
2
Select the
9
VỆ SINH
LỒNG GIẶT (Tub
Hygiene) program.
3
Start.
When the tub is lled with
water
Pause.
4
Put bleach in the tub.
● Use chlorine bleach for
clothes.
Approx. 200 ml
5
After closing the lid
Start.
After approx. 2 hours,
tub cleaning ends.
Detergent case
Wash with water.
■
How to remove
After pulling the case all
the way out, pull it obliquely
upward to remove it.
5
Remove the lter and remove
dirt on the lter.
Water supply lter
Main unit, lid
If stained with detergent or softener
Wipe with a soft cloth.
(To prevent damage to resin parts or metal
corrosion)
● For heavy soil, wipe with a neutral kitchen
detergent.
● Do not splash water.
To Next Page
Loading...
