WashingDetergent
7
Washing
Preparation:
● Check if the washing machine is properly installed. (P. 12)
● Turn on the water faucet.
1
After loading laundry
Turn the power on.
2
Select a program.
(P. 5)
e.g.)
1
GIẶT THƯỜNG
(Normal) program
● To select the Baby-care
program
→Press “Baby-care”
■
Timer preset
3
Start.
The pulsator moves without
water and measures the
amount of laundry (approx.
5 seconds).
Water level indication
(approx. 5 seconds)
Remaining time indication
● To check the water level
→Press “Water Level”.
● To check the program
→Press “Program”.
4
According to the water level indication
Put in detergent.
● Approx. 20 seconds after the water
level is displayed, water supply begins.
5
Close the lid.
Operation ends with beeps.
Set how many hours later to nish
operation. (P. 4)
● 2 minutes after start-up, all indications
except “Preset” turn off.
● To conrm after the timer has been set,
press “Preset”.
● To cancel or change, press “On/Off”.
● The hours that can be set differ depending
on the program.
■
After pressing “Start”
● You can change the water level until the
end of the wash process.
● You cannot change the program.
Timer preset
2 13
When the
4
GIẶT NGÂM NƯỚC XẢ
(Fragrance) program is selected
The buzzer sounds before the nal rinse
and operation is paused. Put the desired
amount of softener which has been
diluted with water directly into the tub.
5 beeps
● If the lid is left closed, the buzzer sounds
every 10 minutes for up to 1 hour.
● If the lid is left closed for more than 1
hour, operation resumes.
● The
4
GIẶT NGÂM NƯỚC XẢ
(Fragrance) program cannot be selected
when Child Lock (P. 10) is set.
To Next Page
Loading...
