To Next PageTo Next PageWhy does my Panasonic NA-F90H2 Washer continue washing past the Reserve Program finish time?
If your Panasonic Washer's washing operation continues even after the Reserve Program's expected finish time, it's likely due to laundry imbalance or issues with water feeding and draining, which can extend the washing time.
Why does my Panasonic NA-F90H2 Washer buzzer sound when I open the lid during rinsing or spinning?
If you hear a buzzer when opening the lid of your Panasonic Washer during cascade rinsing or spinning, it's a reminder not to put your hand or any object into the tub. This is normal operation. To turn off the buzzer, simply close the lid.
Why is the water level too high in my Panasonic NA-F90H2 Washer?
If the water level in your Panasonic Washer is too high for the amount of laundry, it may be because the laundry was already soaked before starting the wash, or there was water in the tub beforehand.
General| Model | NA-F90H2 |
|---|---|
| Type | Top Load |
| Capacity | 9 kg |
| Voltage | 220-240 V |
| Frequency | 50 Hz |
| Water Level | 5 Levels |
| Water Level Selection | Yes |
| Fuzzy Logic Control | Yes |
| Child Lock | Yes |
Steps to ensure the washing machine is properly installed and ready for use.
Explanation of the detergent indicator and how it works for precise measurement.
Method for properly dissolving stubborn powdered detergents.
Details on panel indicators for water level, time, and power status.
How to select wash, rinse, spin, and program courses.
Information on using Reserve, Air Dry, and Ag Crystal Shower courses.
Step-by-step guide to using the Ag Crystal Shower course.
Information on agent lifespan and the protective benefits of Ag ion coating.
Guidelines for folding blankets and preparing them for washing.
How the air dry cycle works and its limitations.
Steps to activate the child lock program and its indication.
Steps to perform the tub hygiene cycle using bleach.
Instructions for cleaning water supply hose filter, Ag Air-Filter, and lint filters.
Guidance on cleaning the main unit and the upper part of the tub.
Immediate actions for spinner tub issues and prohibitions like liquids, magnets, overloading.
Advice on detergent levels, condensation management, and vinyl cover avoidance.
Understanding unbalanced laundry effects and power cord safety.
Guidelines for machine placement, power cord connection, and grounding.
Steps to adjust the legs for level and stable installation.
How to install the water tap adaptor and connect the supply hose to the valve.
Recommendations for extending the drain hose length and height.
Resolving issues with water filling, high or low water levels.
Addressing spin cycle changes, uneven rotation, and button failures.
Troubleshooting draining problems, softener spills, and water supply failures.
Troubleshooting errors related to water hose, lid, position, and Child Lock.
Understanding the H01 error and when to contact a dealer.
