Panasonic NA-FS95G3

‐11‐
6. Trouble Shooting Guide
6.1 "U--" Error indication
＊ If there is an operation error, or if there is a problem with the washing machine, such as
faulty draining, spinning etc.; operation will stop, the warning buzzer will sound, and an error
indication will be displayed.
Indication Content CheckPoint MethodtoClear
U11 MalfunctionofDrain
Checkifabnormalitieslistedbeloware seenin
the externalwaterhose.
*Issomethingwrongwiththedrainhose?
*Isitcloggingwithlint?
*Isthehosecrushed?
*Isthetipsoakedinwater?
*Istheextensionhoselongerthan2meter?
Restartbyopeningandclose
ofthelid.
U12 TheLidisopen
*Isthelidisopen?
*Checktheconditionofcontactpointofthelid
switch.
Closethelid
U13 Unbalancedload
*Isthewashingmachineinanunsteady
position,orisonaninclinedfloorsurface?
*Istheadjustableknobloose?
*Isthelaundryunevenlydistributedinthetub?
Openthelidand redistributetheload.
U14
Malfunctionofwater
supply
*Itisalarmedincreaseitistakesover50min.to
reachselectedwaterlevel.
*Checkifyouhaveforgottentoconnectthe
waterhose andtoturnonthefaucet.
*Thewatersupplycutoff?
*Checkifthewater
supplyandthewatersupply
hosearefrozen.
*Checkiftheconnectionofthewatersupply
hoseonfeedvalveiscloggedwithdirt.
*CheckiftheFeedValveisabnormal,by
measuringthe resistancevalue.
Normalresistancevalue:1.22kΩ
±
8%
Openingandclosingthelidtoreturnto
initialstage
ofwatersupply.
U99 ChildLockoperated
*Checkremainingwaterinthetub.
*Ifnoremainingwaterinthetub,
‐‐>Childlockfunctionhasoperated.
1. Removethepowercord plugandclose
thelid.
2. After5secondre‐pluginandpress
"POWER"switch to"ON"position.