Panasonic NA-FS95G3

‐16‐
7. Disassembly Instructions
7.6 The MECHANISM U replacement
1.Remove4screwsmountingtheBODYB,thenraisetheBODYB.
(BeforeraisingBODYB,thereisahookneedtobeunlock)
2.Remove5screwsmountingtheOUTERTUBCOVER.
3.LoosenthespecialscrewmountingthePULSATOR.
•DonotremovethespecialscrewfromPULSATOR
completely,thenholdthescrewheadtopullthe
PULSATORupwardtoremove.
4.RemovetheSHAFTBUSHING、DSHAFTFLANGE
NUTandDFLANGEWASHERB,thenpulltheTUB
AUupwardtoremove.
5.CloseBODYBandturnthemachineupsidedown.
6.Remove4screws(M8)
mountingtheSPINNERPLATE
B.
7.Remove4screws(M13)
mountingtheMECHANISMU.
8.RemoveVBELT,thenremove
MECHANISMU.
SHAFTBUSHING
DSHAFTFLANGENUT
DFLANGEWASHERB
SPINNER PLATE B
MECHANISM U
View