To Next PageTo Next PageWhat to do if the overheating protection lamp is flashing on my Panasonic Kitchen Appliance?
If the overheating protection lamp is flashing, it indicates that there may not be enough water or the lid was left open. To prevent overheating, ensure you fill the water higher than the minimum water level mark.
Why is the hot water temperature low in my Panasonic Kitchen Appliance?
A low hot water temperature suggests that the energy saving function is either not activated or has been canceled. Release the energy saving function to resolve this.
How to remove scale remaining after cleaning my Panasonic Kitchen Appliance?
If scale remains after cleaning, especially if there's damage to the plastic part of the lid, clean the inner container with citric acid. If scale persists after several citric acid cleanings, consider replacing the plastic part.
Why does my Panasonic Kitchen Appliance have odors in the hot water?
Odors in the hot water can occur due to new resin used in manufacturing or placement on surfaces like vinyl sheets. This will disappear with use. If the unit is placed on surfaces such as a vinyl sheet, the odor may be carried over into the water.
Why does the boiling time change automatically on my Panasonic Kitchen Appliance?
The boiling time changes automatically because the unit updates the new time based on the new memory. When the dispensing time is getting close, it starts boiling automatically.
General| Capacity | 4.0 liters |
|---|---|
| Voltage | 220-240V |
| Timer | No |
| Features | Keep warm function |
| Material | Plastic |
| Frequency | 50-60Hz |
General warnings and cautions for safe use, covering burns, property damage, and user hazards.
Guidelines for safe handling of the power cord and plug to prevent electric shock and fire.
Precautions for using the appliance, avoiding immersion, disassembly, and improper storage.
Specific cautions for handling the appliance, preventing burns from hot parts and spills.
Diagram and list of all parts of the electric thermo pot.
Guidance on rotating the base and handling the mesh filter.
Steps to clean the inner container and water flow pipe before initial use.
Instructions on how to remove, close, and set the lid of the electric thermo pot.
Guidance on how to install the ceramic filter, including handling precautions.
Steps for filling the pot with water and initiating the boiling process.
Instructions on how to dispense hot water and reduce chlorine using specific buttons.
Details on using the reboil function for keeping water warm or reheating.
Instructions for dispensing hot water without the power cord attached.
How to control the volume of water dispensed based on press duration.
How to set and utilize the keep-warm function at different temperature levels.
Instructions for setting a timer and optimizing energy saving features.
How to adjust keep-warm temperatures and use the energy saving function.
How to set and cancel the timer for automatic boiling and keep-warm.
An example illustrating how energy saving adjusts keep-warm temperature based on usage.
Instructions for cleaning the main unit and lid with a damp cloth, avoiding water immersion.
How to clean the inner container, manage scale, and use citric acid for cleaning.
Guidance on cleaning the ceramic filter and mesh filter.
Step-by-step guide for cleaning scale using citric acid and the 'Cleaning' function.
Instructions for dispensing water, removing odor, and re-cleaning if discoloration persists.
Resolving issues with flakes, milky substances, and odors in the hot water.
Troubleshooting hot water not dispensing or flowing smoothly, and unit locking.
Resolving issues with low hot water temperature, fluctuating indication, and unit appearing off.
Troubleshooting energy saving cancellation, healthy tea function, and flashing indicators.
Addressing issues where the unit does not turn on, possibly due to water ingress.
Explaining temperature indication changes and normal operational sounds.
Diagnosing issues with flashing indicator lights and displayed error codes.
Instructions for replacing cracked or worn rubber gaskets on the lid.
Guidance on when and how to replace the mesh filter and ceramic filter.
Detailed specifications including model number, power, dimensions, mass, and capacity.
Notes on performance in different regions, draining for storage, and voltage compatibility.
