– 25 –
L. To Read Program List
1. Open the door and leave it open.
2. While touching Start Pad, touch Number Pad “1”.
All currently programmed information (the program set into each Number/
Memory Pad (A0 to C9), Beep Tone, Program Lock, Oven Lamp settings when
the door is open, Oven Lamp blink settings at the end of heating cycle and Oven
Lamp reduction settings during cooking information) will continuously appear.
Note: When the filter cleaning alarm counter is set, this appears after Program
Lock.
How to erase memory content
1. Open the door (keep it open) and touch Prog Pad.
2. Select the memory number you want to erase, and touch Power Level Selector
Pad.
3. Touch Stop/Reset Pad, and “0” is displayed to indicate that memory is erased.
*Memory content is automatically erased if overwritten.
How to Operate
To Next Page
Loading...
