Panasonic NN-CT565M - Quartz Heater; Convection Fan Assembly

4.7. Quartz heater
1. Disconnect lead wires from heater terminals.
2. Remove heater fixing plate.
3. Remove 2 screws holding heater link on the heater
terminals.
4. Remove 2 screws holding heater mounting plate.
5. Remove the heater by pulling it out.
4.8. Convection fan assembly
1. Remove pulley belt.
2. Remove 5 screws holding fan case unit on the oven.
NOTE:
After replacement/repair of the fan case unit, tighten
mounting screws properly in an x pattern.
13
NN-CT585S / NN-CT565M / NN-CT555W