Panasonic NN-DS59NB - System Cleaning

English
- EN 88 -
Cleaning Setting
F2. System Cleaning
The first stage of this program cleans the system with a citric acid solution.
The second stage runs water through the system to rinse the pipes.
1
Make a solution of 16
g
citric acid and
200
g
of water, add the solution to the
water tank. Ensure drip tray is empty.
2
Tap Cleaning pad once.
3
Turn the Dial to select F2. System
Cleaning.
4
Press the Dial to confirm the selection.
5
Press the Dial to start.
The program will run for approx. 29 minutes.
6
After the program has paused, empty the
drip tray and fill the water tank with water
(to max level).
7
Press the Dial to start.
The program will run for approx. 1 minute.
Empty the drip tray after the program has
finished.