- EN 91 -
Cleaning the Water Tank
Remove the water tank and clean
the compartment where the water
tank is inserted.
Open the water supply cap, remove
the lid and pipe cap and clean.
Clean with a soft sponge in water.
Pipe Cap
Ensure it faces downwards
If the pipe cap is difficult to remove, wiggle from side to side. When
re-fitting, make sure that the pipe faces down (see diagram).
Note
1. There is a spring at the insertion port of the pipe, please store it
properly when cleaning, and do not lose it.
2. Clean the water tank at least once a week to prevent build up of
limescale.
3. Do not use a dishwasher to clean the water tank or parts of the water
tank.
To Next Page
Loading...
