Panasonic NN-GF668M - Fan Motor

12. Release catch hook from Inverter bracket A.
13. Remove 2 screws holding H.V. Inverter on Inverter bracket.
6.4. Fan motor
1. Disconnect 2 lead wires from fan motor terminals.
2. Remove 4 screws holding air guide B on magnetron & on
base plate respectively, then remove air guide B.
3. Remove 2 screws holding fan motor and detach fan motor
from oven assy.
4. Remove fan blade from fan motor shaft by pulling it straight
out.
13
NN-GF668M