NR-BY558/NR-BY55B/NR-BY608
13. DISASSEMBLY INSTRUCTION
13.1 LED PCB and Cover LED lamp position
13.2 Cover LED lamp
NR-BY558XS/PS/NR-BY55B NR-BY608XS/PS
Fig. 1
Fig. 3
Fig. 2
Fig. 4
Fig. 5
13.2.1 Prepare black tape to head of screwdriver as Fig.1
13.2.2 Take off cover LED lamp by use screwdriver put between gaps of cover LED lamp
with PC Liner at the lock point as Fig. 2.
13.2.3 Check the locks point by see at “Arrow Mark” 3 position as Fig. 3.
13.2.4 Use screwdriver push up PAS-BW465 (LED PCB) soft and carefully for lock
loose as Fig. 4.
13.2.5 Use hand pull up socket of PAS-BW465 (LED PCB) for change new part
as Fig.5.
LED LAMP
(2 position)
LED LAMP
(3 position)
- 22 -
To Next Page
Loading...
