Panasonic NV-GS10 - Camera Mode; Recording Operations

Camera Mode
-17-
Camera Mode
Recording
When recording with the
[AUTO/MANUAL/FOCUS] Switch
(41) set to
[AUTO], the Movie Camera automatically adjust
the focus and white balance. In some cases, they
cannot be adjusted automatically and need to be
adjusted manually. (
-23-, -25-)
≥Before turning on the power, remove the
Lens Cap. If the Lens Cap is still attached
when the power is turned on, Automatic
White Balance Adjustment (
-23-) may not
function correctly.
1 Set the [OFF/ON/MODE] Switch (37) to [ON].
≥The [CAMERA] Lamp
(39) lights up.
2 Press the Recording Start/Stop Button (3 8).
≥Recording starts.
≥After the [RECORD] is displayed, it changes
to [REC].
ª Recording Lamp (Tally Lamp)
The Recording Lamp (11) lights up during
recording and alerts those being recorded that
recording is in progress.
≥The Recording Lamp does not light up if the
[REC LAMP] on the [OTHER FUNCTIONS1]
Sub-Menu is set to [OFF].
AUTO
MANUAL
FOCUS
(41)
CAMERA
VCR
O
F
F
O
N
M
O
D
E
(37)
(39)
(38)
RECORD
REC
(11)
ª To Pause the Recording
Press the Recording Start/Stop Button (38)
again.
The [PAUSE] Indication is displayed.
≥If the Recording Pause Mode continues for
more than 6 minutes, the power is turned off
automatically for tape protection and power
conservation. To resume recording from this
condition, turn off, then turn on the power again.
ª To Check the Recording
By pressing the [S] Button (3) briefly in the
Recording Pause Mode, you can play back the
last few seconds of the recorded scene.
≥The [CHK] Indication is displayed. After
checking, the Movie Camera resumes the
Recording Pause Mode.
ª To View the Recorded Scene while the
Recording Is Paused (Camera Search)
The recorded scene can be viewed by keep
pressing the [SEARCHj] Button
(3) or
[SEARCHi] Button
(5) in the Recording Pause
Mode.
≥When the [SEARCHj] Button is pressed,
images are played back in the reverse direction.
≥When the [SEARCHi] Button is pressed,
images are played back in the forward direction.
ª To Finish the Recording
Set the [OFF/ON/MODE] Switch (37) to [OFF].
≥For other notes concerning this item, see
-38-.
PAUSE
PAUSE
SEARCH
(3)
SEARCH SEARCH
BACK
LIGHT
(3) (5)
30B-ENG.book 17 ページ ２００３年１月２３日 木曜日 午後８時４６分