Camera Mode
-21-
2 When the image is completely gone, press
the Recording Start/Stop Button
(38) to
start recording.
3 Release the [FADE] Button (7) about
3 seconds after starting recording.
≥The image reappears gradually.
Fade Out
Fade Out causes images and sounds to
disappear gradually, leaving a black screen at the
end of a scene.
1 Keep pressing the [FADE] Button (7) while
recording.
≥The image fades out gradually.
2 When the image is completely gone, press
the Recording Start/Stop Button
(38) to stop
recording.
3 Release the [FADE] Button (7).
≥The still picture cannot fade in or fade out.
Backlight Compensation Function
This prevents a recording subject from being
recorded darker in backlight. (Backlight is the light
that shines from behind a recording subject.)
1 Press the [BACK LIGHT] Button (4).
≥The [ª] Indication flashes and then is
displayed.
(38)
FADE
(7)
(38)
BACK
LIGHT
(4)
≥The entire screen becomes brighter.
To Resume Normal Recording
Press the [BACK LIGHT] Button.
≥For other notes concerning this item, see
-39-.
Night View Functions
Colour Night View Function
This function allows you to record colour images
brightly in a dark place without lighting the Video
Flash.
1 Press the [COLOUR NIGHT VIEW] Button
(6) until the [C.NIGHT VIEW] Indication
appears.
0 Lux Night View Function
Using the LCD Monitor light, a dark scene of
almost 0 lux can be recorded.
2 Press the [COLOUR NIGHT VIEW] Button
(6) until the [0LUX NIGHT VIEW] Indication
appears.
≥The [REVERSE THE LCD MONITOR]
Indication appears.
3 Rotate the LCD Monitor frontward (to the
lens side).
≥The screen becomes white and the
Viewfinder turns on.
≥The available range of the LCD Monitor light
is within approximately 1 metre.
ª
COLOUR
NIGHT
VIEW
(6)
C.NIGHT
VIEW
0
LUX
NIGHT VIEW
C.NIGHT
VIEW
30B-ENG.book 21 ページ ２００３年１月２３日 木曜日 午後８時４６分
To Next Page
Loading...
