Panasonic NV-VS3A - Battery Installation and Management

Attaching the Charged Battery
1
2
Insert the Battery with its top (so that the arrow
points upward) into the top Battery Holder.
Press the bottom of the Battery toward the
Movie Camera until it locks with a click.
Set the [CAMERA/OFF/VCR] Switch to
[CAMERA] or [VCR].
Turn the switch while pressing the button @.
The Remaining Battery Operation Time can be
confirmed both in the Finder and on the LCD Monitor.
To ensure more precise indication of the remaining
battery power, attach a fully charged Battery.
®For details about the Remaining Battery Power
Indication, read “Checking the Remaining Battery
Power”. (~ 14)
@ Removing the Battery
4
5
Set the [CAMERA/OFF/VCR] Switch to [OFF].
Hold the Battery firmly to prevent it from
dropping and pull it off while sliding the
[<IBATTERY EJECT] Lever in the direction of
the arrow.