Panasonic NV-VS3A - Selecting Recording Speed and Tape Length

90 M45 60
hALL
Selecting the Recording Speed
You can select the desired recording speed (SP Mode or LP
Mode) by selecting the corresponding setting for [REC
SPEED] on the [OTHER FUNCTIONS] Sub-Menu.
Press the [MENU] Button.
@The [CAMERA FUNCTIONS] Main-Menu appears.
Turn the [A ¥] Dial to select [OTHER
FUNCTIONS] and then press the [SET] Button.
3 Turn the [A ¥] Dial to select [REC SPEED].
4
Press the [SET] Button to select the desired
recording speed (SP or LP).
®[SP] means Standard Play. [LP] means Long Play.
5 ress the [MENU] Button to exit the menu.
Selecting the Correct Tape Length
To ensure that the Remaining Tape Time Indication displayed
during recording and playback is correct, you need to set the
tape length that matches that of the inserted cassette.
6 Press the [MENU] Button.
@The Main-Menu appears.
7 Turn the [A ¥] Dial to select [OTHER
FUNCTIONS] and then press the [SET] Button.
8 Turn the [A ¥] Dial to select [TAPE&3].
9 Press the [SET] Button to select the correct
tape length.
The selected tape length is marked with the [>] Mark.
®The Tape Length Indications change in the following
order:
nN
»[30] ——> [45] > [60]
| [3130] (345) [2160]
1 0 Press the [MENU] Button to exit the menu.
@: Camera Mode
@: VCR Mode
23