Panasonic NV-VS3A - Recording in Full Auto Mode

CAMERA,
ord
von
+
he AAR CU ANS islamic be
Recording in the Full Auto Mode
The Full Auto Mode adjusts the white balance and focus
automatically. However, if you want, you can also adjust either
one or both of them manually (+> 56, 58).
When recording in a dimly lit location, the picture may become
noisy and less sharp, so we recommend that you use the {R/
Video DC Light (optional), etc. to brighten up the scene.
1 set the (CAMERA/OFFIVCR] Switch to
[CAMERA].
Turn the switch while pressing the button @.
The [CAMERA] Lamp @ lights.
2 Confirm that the [AUTO] Indication © is
displayed.
The [(@)] Lamp @ lights.
©The initial setting is [AUTO].
elf the [MNL], [ 48 J, [aa] [a], (KEY) or [8%] Indication is
displayed, press the [PROG. AE] Button repeatedly until
the [AUTO] Indication appears.
3 Press the Recording Start/Stop Button to start
recording.
©Recording starts and the [[>[>] Indication and the [REC]
Indication @ appears. The Tally Lamp (> 32) on the
front of the Movie Camera remains lit during recording.
([REC] means Recording.)
4 To pause recording:
Press the Start/Stop Button again.
©The [PAUSE] Indication appears. @
5 To finish recording:
Set the [CAMERA/OFF/VCR] Switch to [OFF].
elf you use an E55 type cassette for recording, the picture
may contain some distortion when you play it back. However,
this is not a malfunction of the Movie Camera.
31