Panasonic NV-VS3A - Page 19

EYTIMFE SETUP
Ba
a
200
1
1
4
3
-Otm>m
HED O-<rvG
fe)
<Z<O00ZzZ-o4
m many oO on<
A
T
$s
$
v
D
c.
Do
R mm Icom vormm
0 rman
PRESS MENU TO RETURN
o
© 4
o7
a7
LODZEVF SETUP.
LOD BRIGHTNESS
Lb huikess sta
LCD COLOUR
(-lilit----[+]
EVF BRAIGHTNESS
C-J]blibes--C4]
PRESS MENU FTO RETUAN
Camera Mode Main-Menu
[CAMERA FUNCTIONS] (Continued)
[DATE/TIME SETUP] Sub-Menu (@) (-» 29)
[OTHER FUNCTIONS] Sub-Menu 6)
@® Recording Speed Mode [REC SPEED] (> 23)
elf you set [S-VHS ET] on the (OTHER FUNCTIONS] Sub-
Menu to [ON], [REC SPEED] is automatically set to [SP].
Even if you later set [S-VHS ET] to [OFF], [REC SPEED]
remains set to [SP]. Therefore, to use the LP Mode when
recording in the VHS format, set [REC SPEED] to {LP}.
@®
Tape
length
[TAPE@3]
(+
23)
®
Self-Recording
[SELF
SHOOT]
(->
64)
@ S-VHS ET Mode [S-VHS ET] (-> 25)
When an S-VHS-C cassette is inserted in the Movie
Camera, [S-VHS}] is indicated instead of [S-VHS ET] and
you can set this item to [ON] or [OFF] to select or cancel
the S-VHS recording format.
lf you set [REC SPEED] on the [OTHER FUNCTIONS]
Sub-Menu to [LP], [S-VHS ET] is automatically set to
{OFF}.
lf you insert an S-VHS-C cassette with a broken out
erasure prevention tab, [S-VHS ET] is indicated instead
of [S-VHS], however, this is not a malfunction. If you want
to perform recording, use a cassette with an intact tab.
(> 24)
® Voice Zoom [VOICE ZOOM] (-> 34)
@® Counter Display Mode [DISPLAY] (7 73)
@ Counter Reset [C.RESET] (~» 72)
@ Demonstration Mode [DEMO MODE] (+ 85)
@ Returning to the Main-Menu [RETURN]
[LCD/EVF SETUP] Sub-Menu © (+ 21)