Panasonic NV-VS3A - Remote Controller Battery Insertion

Inserting the Batteries into the Remote
Controller
1 Remove the Battery Cover.
2 Insert the batteries with the polarity (@ and ©)
correctly aligned.
3 Replace the Battery Cover.
@ Replacing the Batteries
The life of the battery is about 1 year.
When the batteries are exhausted, purchase two new “AAA”,
“JM-4” or “R03” type batteries and insert them in the same
way as explained above.
Do not mix old batteries with new batteries.
@ Do not mix different battery types, i.e. Alkaline and
Manganese. ball
© Do not use rechargeable (Ni-Cd) batteries.
© Do not short-circuit the batteries.
When you do not use the remote controller for a long time,
take out the batteries and store them in a cool, dry place.
CAUTION
Danger of explosion if batteries are incorrectly replaced.
Replace only with the same or equivalent type
recommended by the equipment manufacturer. Discard
used batteries according to manufacturer's instructions.
63