Panasonic NV-VS3A - Creating and Inserting Custom Titles

69
Creating Your Own Titles and Inserting
Them During Recording
(Digital Superimposer Function)
This function lets you store the image of a handwritten title,
signboard, printed title, (or some similar object with strong
contrast) in the Movie Camera’s digital image memory. You
can then change the dark parts of this image to a desired
colour and superimpose it during recording.
Storing Your Own Title in the Digital Image
Memory
1 Prepare a title that has strong contrast (e.g.
write with a thick black marker).
2 With the Movie Camera in the Recording Pause
Mode, aim it at the title.
elf the Full Auto Mode does not provide a sharp picture,
adjust the focus manually. (> 58)
When you want to capture a small title, use the Macro
Close-up Function. (-> 35)
As the title picture is automatically cropped on all four
sides, aim the Movie Camera so that there is sufficient
empty space around the actual title.
3 Press the [STORE] Button for more than
2 seconds.
©The title is now stored in the digital image memory and
it remains displayed.
4 Press the [OFF/ON] Button briefly to make the
title disappear.
ePressing the [OFF/ON] Button briefly repeatedly makes
the title appear and disappear.
The title stored in the digital image memory may be
automatically cancelled when you store a new title, remove the
Battery, disconnect the AC Adaptor, or when the Battery
becomes discharged.