Panasonic NV-VS3A - Demonstration Mode

® ® i sTpBy |
MOTION SENSOR!
ie ® o_ 4 4 @ :
S-VHS ET
BAY D.FADE1
ee
@ e H :
@ Black-and-White Mode (+ 47)
@ Digital Fade Mode (- 50)
@ Voice Zoom Mode (-> 34)
@ S-VHS Mode (~ 25)
@ S-VHS ET Mode (-> 25)
@® Recording Mode (-> 65)
@ Recording Pause Made (-> 65)
©The above indications @ to @ are only displayed when
recording in the Mirror Mode. (-> 65)
@® Motion-Sensor-Controlled Recording Function Stand-
by Mode (> 51)
@ 0 Lux Night View Mode (- 53)
@ Demonstration Mode
Demonstration Mode
When the Movie Camera is turned on and in the Camera
Mode without any cassette inserted, and you leave it for
10 minutes without activating any function, it automatically
switches over to the Demonstration Mode which demonstrates
its many functions.
You can also start the Demonstration Mode by setting
[DEMO MODE] on the [OTHER FUNCTIONS] Sub-Menu of
the [CAMERA FUNCTIONS] Main-Menu to [ON] and then
exiting the menu.
©Pressing a button or displaying a menu temporarily suspends
the Demonstration Mode. However, if you leave the Movie
Camera in this condition without activating any function for
more than approximately 10 minutes, the Demonstration
Mode resumes.
@|f you do not want the Demonstration Mode to be activated,
set [DEMO MODE] on the menu to [OFF].
®|f you set the [CAMERA/OFF/VCR] Switch to [CAMERA]
while pressing the [>] Button, (DEMO MODE] on the menu
is automatically set to [ON] and the Demonstration Mode =
starts immediately.
elf you set the [CAMERA/OFF/VCR] Switch to [CAMERA]
while pressing the [Ml] Button, [DEMO MODE] is
automatically set to [OFF].
85