Panasonic Omnivision PV-7400 User Manual

Playback a Tape
Insert a cassette.
* VCR power comes on automatically.
This indicator lights in the ver
Multi Function Display. oN
Push PLAY on the remote or VCR
(2)
[us
to
stan
playback
- Playback begins automatically -
if cassette has no record tab.
- Push STOP on the remote or VCR
to stop playback.
A, soe Push STOP/EJECT on the VCR
Gs) to eject the cassette.
TRACKING/ Multi FF/REW (ov)
V-LOCK Function Search * You may eject a cassette with power on or off.
Display i
(A onec list before you begin.
E] All connections are made.
(See pages 6~9.)
CJ TV and VCR are plugged in.
C] TV is turned on and set to the VCR
channel (CH 3 or 4).
To Find a Particular Scene During Playback
Push REW or FF during playback
to search for a scene.
ES o ED
* Search speed for SP mode tapes is 9 times
i S A (Models PV-7400 and PV-7450 only) and SLP
mode tapes 27 times the normal speed.
* Some noise bars will appear during search.
Special Effects During Playback
These features work best in SLP mode. (SP or SLP mode for models PV-7400
and PV-7450.) The sound will be muted.
Slow Motion Playback
Push SLOW to start slow motion playback.
Push PLAY or SLOW to release.
Still (Freeze) Frame Picture
Push PAUSE to freeze and release the picture.
* To reduce picture noise, first push SLOW. Then, use CH (TRACKING)
A/V to clear up the picture, then push PAUSE.
Frame by Frame Advance
In Still mode, hold down SLOW to advance the still picture one
frame at a time. Push PAUSE to release.
Features for a Quality Picture
Digital Auto Picture (For Models PV-7400 and PV-7450 only)
This feature automatically controls the video output signal for less
Model PV-7450 remote noise depending on the tape condition.
is shown here. Digital Auto Tracking
This feature continuously analyzes the signal and adjusts for optimum
picture quality.
Manual Tracking Control (to reduce picture noise
Caution: Use during Playback and Slow Motion mode to reduce picture noise.
Please inspect your cassette tapes for To return to Auto Tracking mode, push POWER off and then on again.
any loose or peeling labels as they
may become jammed in your unit. V-Lock Control (to reduce picture jitter
a For Models PV-7400 and PY-7450 oni
In Still mode, CH (TRACKING) A/V operate as a V-Lock control.
Push A/V until the picture is stabilized.
o.
on * After the VCR is in Still or Slow mode for 3 minutes, it will switch to
"OE, the Stop mode automatically to protect the tape and the video head.
ES 2
15
Push CH (TRACKING) A/V during playback until the picture clears up.
QU
t9
d
O
O
5
(D
=
Q)
=
O
-

Panasonic Omnivision PV-7400 Specifications

General

Brand	Panasonic
Model	Omnivision PV-7400
Category	VCR
Language	English