Panasonic Omnivision PV-7400 User Manual

Additional Connections
¡O [Ree All connections on this page are made with 75 Ohm coaxial cables.
Without a Converter/Descrambler Box
VCR IN FROM ANT. TV
You can:
1} Use your VCR Remote Control to select channels.
2) Program one or more unscrambled channels for
unattended recording.
You cannot:
record or view scrambled channels IN FROM
ith thi CABLE
with
this
connection.
VHF/UHF
With a (CABLE to VCR) Converter/Descrambler Box
You can: Cable TV Converter
Box
VCR OUT TO TV TV
IN FROM ANT:
1) Record and view any channel including
scrambled channels; channel selection
must be made at the Cable TV Converter
IN FROM
Box. CABLE
2) Program one channel for unattended
recording.
VHF/UHF
You cannot:
select channels from VCR or TV.
With a (VCR to TV) Converter/Descrambler Box
You can: VCR
1) Use your VCR Remote Control to select channels.
2) Program unattended recordings of more than
one unscrambled channel. IN FROM
CABLE
You cannot:
record scrambled channels with this connection. Cable TV
Converter
With Two Converter/Descrambler Boxes
If you want to record and view
a combination of scrambled IN FROM
and unscrambled channels, TV CABLE
you will need additional
equipment.
This connection requires
Converter Box 1
VCR
2-Way
C
iT
two
converter
boxes,
Niue
Converter
an
A/B
switch,
and
OUT2
Box
2
a
2-way
splitter
<I
as
shown
here.
AA
p
"/ OUTTOTV

Panasonic Omnivision PV-7400 Specifications

General

Brand	Panasonic
Model	Omnivision PV-7400
Category	VCR
Language	English