Panasonic Omnivision PV-7400 User Manual

Timer Recording
You can set up the VCR to record a one
time, daily, or weekly program while you
are away or otherwise occupied. Up to 8
programs can be stored in memory.
te list before you begin.
C] Ail connections are made.
(See pages 6-9.)
TV and VCR are plugged in and turned on.
U VCR/TV selector is set to “VCR.”
[ ] Clock is set to correct time.
L] Record tab in place. (See page 5.)
@ 5606 $5087
rr e]
GO e
Model PV-7450 remote
is shown here.
$
(:
un
18
| Push PROG to display AJE|, START STOP CH
O the program screen. Woo:
ELECT START DATE
: y SELECT :4 Y KEY
* If a program is already in memory, SET :b KEY
push AY and P to select an unused END — :PROG KEY
program number.
a Push AV and P to select and
Gb)» set one of the following:
> * 1-31 =One time recording
* DAILY =Same time MON~FRI
* WEEKLY =Same time once a week
Example B9. 311-726
Today's.—— 7 SELECTA / V Selection Order DAILY
Date
L wecky "— _ WEEKLY ___ WEEKLY
(SAT) (MON) (SUN)
B) A. Push AV ana 4P Remaining Items
C5 to be set:
«(Go)» to select and set - pl
= each of the remaining -STOP time
items at right. * CH(annel) number,
or LINE for outside
source recording
To Make Corrections * Speed (SP, LP, SLP)
Repeatedly push > to move the cursor to the right,
or to move to the left to the incorrect entry and
4 ----i-- omo — o
make the correction.
CANCEL :ADD/DLT KEY
SELECT 1-8:4 Y KEY
To Enter More Programs O BCE KEY
Push AY and P to select and set a blank
program number, and then repeat steps 2 and 3.
Sd o
zm Push POWER off
to set the timer.
Push PROG to end
the program.
* This screen appears for
confirmation.
P DT START STOP CH SPD
1DAY 9:00A12:00A 08 SP
2
da eee ee Se de
Push PROG to exit
this mode and return
to the normal screen.
* When recording programs via
a cable box, make sure the
cable box is left ON and
tuned to the desired channel.
Multi Function Display
* Acassette with no record tab is ejected and TIMER indicator flashes when the power is turned off to set the timer.
* If the start times of two programs overlap, the lower numbered program will have priority.
* If the start time for a timer recording comes up during a normal recording or One Touch Recording (page 16),
the timer recording will not be performed.
* If there is a power interruption of more than one minute, the recording will not be performed or continue.

Panasonic Omnivision PV-7400 Specifications

General

Brand	Panasonic
Model	Omnivision PV-7400
Category	VCR
Language	English