Panasonic Omnivision PV-7400 User Manual

Record On a Tape
0
e
e fm list before you begin.
O Ail connections are made.
(See pages 6-9.)
[] VCR is Plugged in.
[] TV is turned on and set to the VCR
channel (CH3 or CH4).
Multi Function
Display
D
©)
O
VCR/TV CHANNEL
Up/Down PLERED
O
@)
| mann a —.
One
Insert a cassette with record tab.
* VCR power comes on automatically.
A TRACKING b>
"Push CH A/¥ or
NUMBERED keys to
select a channel.
* Or, push CHANNEL A/V
on the VCR.
* Holding down CH A/Y
will increase the channel
search speed.
* To record from an outside source, push CH A/¥
or INPUT to select "LINE" (see page 17).
Model PV-7450 only
Push SPEED to change
the recording speed.
* SP z Standard Play
LP z Long Play
SLP z Super Long Play
(See page 5.)
. Push REC/TIME on the remote
, control or VCR to start recording.
* To edit out unwanted portions, push PAUSE to
pin the recording in progress.
o release, push PAUSE again.
(After the VCR has been in Pause mode for 5
minutes, it will stop automatically to protect the
tape and video head.)
Touch Timer Recording (OTR)
The VCR starts recording and turns itself off at a preset time.
In step 4, push REC/TIME repeatedly to set the length of the
recording. Each push will change the stop time as shown.
Model PV-7450 remote
is shown here.
&
Record One Program While Watching Another
I Push VCR/TV while recording is in progress to turn
off the VCR indicator in the Multi Function Display.
2 Use the TV channel controls to select a program.
The VCR will continue to record your program while
you watch any channel you choose.
* To switch back and forth between the recording and
viewing channel, push VCR/TV.
16
Normal Rec UN
OE 2:00 *— 1:30
* "TIMER" lights in the Multi Function Display.
* The remaining recording time can be displayed by pushing
DISPLAY in OTR mode.
.. Push STOP to
. Stop recording.
* Or, push STOP/EJECT on the VCR.
-mt
Selecting Channels at the VCR
1 Turn your TV and VCR on.
* VCR Indicator lights on the Multi Function Display.
If indicator doesn't light, push VCR/TV to turn it on.
Use CH A/¥ on the remote control or VCR
to select channels.
* To switch back to TV channel selection, push
VCR/TV to turn VCR indicator off, or simply turn
the VCR power off.

Panasonic Omnivision PV-7400 Specifications

General

Brand	Panasonic
Model	Omnivision PV-7400
Category	VCR
Language	English