Panasonic Omnivision PV-7400 User Manual

Using the Universal Remote Control
Once the remote control has been properly set up, you can select VCR, TV, or
CATV mode depending on which functions you wish to control.
= ` Push VCR or TV or CATV on the remote control to
select the desired mode.
(See below for the controllable functions of each mode.)
: NOTE:
CATV
D
VCR
debo
In TV or CATV mode, it may be necessary to push DISPLAY/ENTER
after pushing NUMBERED keys for channel selection.
VCR Mode
In VCR mode, the following
buttons are available.
TV Mode
In TV mode, the following
buttons are available.
CATV Mode
In CATV mode, the following buttons
are available.
VCR TV CATV
All function buttons. POWER, INPUT, NUMBERED POWER, NUMBERED keys,
keys, DISPLAY/ENTER, DISPLAY/ENTER, CH UP/DOWN
TM CH UP/DOWN, VOL UP/DOWN TV
VOL
UP/DOWN
IV
VCR VOL UP/DOWN
VCR/TV, PLAY, STOP, FF, REW, VCR
PAUSE, SLOW, REC, SAP/Hi-Fi,
SPEED, COUNTER RESET,
ZERO/ MIN.
©
VCR/TV, PLAY, STOP, FF, REW, PAUSE,
SLOW, REC, SAP/Hi-Fi, SPEED,
COUNTER RESET, ZERO/1 MIN.
F
Model PV-7450 remote is shown here.
E * Some TV and. Cable Box brands require you to turn on the power manually.
- Not all functions listed may be controlled by this remote control.
25
OQ uep NOA 9J0IN

Panasonic Omnivision PV-7400 Specifications

General

Type	VCR
Brand	Panasonic
Model	PV-7400
Tape Format	VHS
Heads	4
Remote Control	Yes
Clock	Yes
Timer	Yes
Tuner	Yes
Playback Speed	EP
Inputs	Composite video
Outputs	Composite video