[_PChecklistbeforeyoubegin.
[] Clock is set to correct time.
!
4
Time Stamp Feature
For about the first 10 seconds of each recording, the VCR automatically writes
the following program data on the tape: Date, Start time, Scheduled stop time
(for Timer Rec. only), Channel No. and Category (for Timer Rec. only). Then,
if playback is started at the starting point of the recording, this information will
be displayed about 7 seconds after playback begins for a few seconds.
1Press ACTION to display the menu.
2 Press AV to select "SET UP
FEATURE," and then press • to
display the "SET UP FEATURE" screen.
3 Press • to select =ON" or "OFF."
• When "OFF" is selected, the program data is
written on the tape, but will not be displayed
for the first 5 seconds of playback.
SET UP CI-IN/N_
IDIOI_I _E: ENGLISI
SELECT:*" •
SET :1.. KEY
EI/D :ACTION KEY
SET :_ _ ,
ENO :ACTIQN KEY
4 Press ACTION twice to exit.
<Time Stamp Example>
Normal/
One Touch Recording Timer Recording When Clock is not set...
1212811998 MON 1212811998 MON --I--I ....
12:00PM 12:00PM -- I:00PM •
c. o,,_ c. o8_ _ _;'o;
• If the tape speed is changed immediately after recording begins,
the display may be incorrect.
Blue Back ON/OFF Feature
You may choosewhetheror not youwantthe VCRto displaya solidblue
screenwhenthe broadcastsignalis veryweakor nonex_stenL
a Press ACTION to display the menu.
bPress AV' to select =SET UP
VCR," and then press • to
(:,splay the =SET UP VCR" screen.
C Press A_' to select =NOISY CH
BLUE BACK," and then press •
to select "ON" or "OFF."
• When "ON=is selected, a solid blue screen
appears whenever the signal is weak or
SET UP FEAR/RE I
SETCLOCK I
SETUPCI'LVlNEL I
. ID IDMM I.NCGI_: EN_I Sltl
SELECT:& _' KEY I
sEr :_ KEY I
ENO :ACTION KEY J
l li_ SE'I" UP VI_! ......
_¥ PLAY : ON
LECT:& • KEY
SET ;),KEY • .:'-
ENO :ACTION KEY
nonexistent.When "OFF"is selected,the.picture
is displayedregardlessof the signalcondition.
• The pictureca_notalwaysbe seendearlywhen"OFF"is selected.
dPress ACTION twice to exit.
21